PO BOX 1654  97075-1654     8687 SW HALL BLVD     BEAVERTON, OREGON     FAX 503.646.3903 

TYPE-10 (TELLABS) PRODUCT LISTING

CONTENTS:

>

MOUNTING SHELVES

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS

PDF

1010120000 1012 MOUNTING SHELF, 19 X 6, RECESSED, WIRE-WRAP Type-10 12 pos.

PDF

101012BP01 1012UC MOUNTING SHELF, 19 X 6, FLUSH, 3 CONNECTOR Type-10 12 pos.

PDF

10101200F0 1012F MOUNTING SHELF, FLUSH, WIRE-WRAP Type-10 12 pos.

PDF

101012U000 1012U MOUNTING SHELF, UNIVERSAL RECESSED, WIRE-WRAP Type-10 12 pos.

PDF

101012U0F0 1012U MOUNTING SHELF, FLUSH, WIRE-WRAP Type-10 12 pos.

PDF

101012UC00 1012UC MOUNTING SHELF, UNIVERSAL RECESSED, CONNECTORIZED Type-10 12 pos.

PDF

101012UC01 - - MOUNTING SHELF, UNIVERSAL RECESSED, CONNECTORIZED Type-10 - -

PDF

101012UCF0 1012UCF MOUNTING SHELF, UNIVERSAL FLUSH, CONNECTORIZED Type-10 12 Pos.

PDF

101012UCAE 1012UC UUNIVERSAL SHELF, 19 X 6, RECESSED, CONNECTORIZED Type-10 12 pos.

PDF

101012W001 1012UC UNIVERSAL SHELF, 19 X 6, RECESSED (OR FLUSH), CONNECTORIZED Type-10 12 pos.

PDF

101012W002 1012UC MOUNTING SHELF, RECESSED, 8 CONNECTORIZED, PREWIRED Type-10 - -

PDF

10906000 - - HORIZONTAL MTG. SHELF, 2 POSITIONS, TB, WIRED FOR TWO (2) MODEL 2010 WITH ONE (1) F AND ONE (1) M TELCO CONNECTOR.
NOTES: No power supply. Unit is wired for two (2) Model 2010 Notch Filters with one (1) male connector for input and one (1) female connector for output. Three (3) position terminal block wired to PIN-18 (GND) and PIN-36 (+12VDC) of each connector and to Frame Ground (FG)
Type-10 2 pos.
CALL 10906003 - - 117AC / 24Vdc FIXED Type-10 -
CALL 1090600301 - - WITH POWER SUPPLY, 2 POS. PRE-WIRED Type-10 -
CALL 10906003xx - - w/ POWER SUPPLY, BOTH POSITIONS WIRED FOR SPECIFIED MODEL Type-10 -
CALL 1090600401 - - w/ POWER SUPPLY, 1 POSITION PRE-WIRED Type-10 -
CALL 10906004 - - MOUNTING SHELF HORIZONTAL, 117VAC / 48VDC, 2 POS. Type-10 -
CALL 10906004xx - - WITH POWER SUPPLY, ONE POSITION PRE-WIRED FOR SPECIFIC MODULE, REMAINING POSITION WIRE-WRAP CONNECTION FOR CUSTOMER USE. Type-10 -
CALL 1090600700 - - WITH NO POWER SUPPLY, 2 POS PRE-WIRED Type-10 -
CALL 10906007xx - - NO POWER SUPPLY, BOTH POSITIONS PRE-WIRED FOR SPECIFIC MODULE Type-10 -
CALL 1090600800 - - NO POWER SUPPLY, ONE POSITION PRE-WIRED Type-10 -
CALL 10906008xx - - NO POWER SUPPLY, ONE POSITION PREWIRED FOR SPECIFIC MODULE, REMAINING POSITION WIRE-WRAP CONNECTION FOR CUSTOMER USE. Type-10 -

PDF

109060BLNK - - MOUNTING SHELF HORIZONTAL 2-POS BLANK, WIRE-WRAP w/3 POSITION TERMINAL BLOCK.
NOTES: No power supply. Customer wired to two (2) 56-pin wire-wrap edge connectors. 3 position terminal block wired to pin-17 (GND) and pin-35 (-BATT) of each edge connector and to frame ground (FG). (NCMMB323RA)
Type-10 2 pos.

PDF

10906001 - - MOUNTING SHELF HORIZONTAL 2-POS WIRED 4445A, w/3 POSITION TERMINAL BLOCK FOR TWO (2) MODEL 4445A Type-10 MODULES WITH ONE (1) MALE TELCO CONNECTOR.
NOTES: No power supply. Unit is wired for two (2) Model 4445A Splitter/Concentrator Type-10 Modules configured as 9 Port Splitter/Concentrator with one (1) MALE Telco connector. 3 position terminal block wired to pin-17 (GND) and pin-35 (-BATT) of each edge connector and to frame ground (FG).
Type-10 2 pos.
CALL 10906001xx - - 117VAC / 48VDC WIRED Type-10 -
CALL 1090600100 - - - - Type-10 -

PDF

1090600101 - - HORIZONTAL MOUNTING SHELF 2-POS., w/ ONE (1) MODEL 4001C W/ 117VAC / 48VDC POWER SUPPLY.
NOTES: 117VAC / -48VDC power supply wired to pins 17 (GND) and 35 (-BATT) of each edge connector. Twelve (12) position terminal block at Position-1 wired for model 4001C LINE AMP. Position-2 has wire-wrap edge connector for customer wiring.
Type-10 2 pos.

PDF

1090600102 - - HORIZONTAL MOUNTING SHELF 2-POS., Type-10 POWER SUPPLIES w/ MOLEX CONNECTORS, 117VAC PIGTAIL EACH, 3 POSITION TERMINAL BLOCK FOR DC POWER OUTPUT.
NOTES: Two (2) Molex receptacles with 117VAC pigtails each for mounting two (2) Type-10 Power supplies. 3 position terminal block for diode "O RED" DC power output.
Type-10 2 pos.

PDF

10906002 - - HORIZONTAL MOUNTING SHELF 2-POS., FXS REMOTE END, AMERICAN ELECTRIC POWER.
NOTES: 117VAC / -48VDC power supply. Position-1 is wired for Type-10 RING GENERATOR. Position-2 wired for modified Model 6123A. Configuration specific to American Electric Power (Model 8087).
Type-10 2 pos.

PDF

1090600002 - - HORIZONTAL MOUNTING SHELF 2-POS., (1) MODEL 4012, (1) MODEL 2010, WITH 3 POSITION TERMINAL BLOCK.
NOTES: No power supply. Unit is wired for Model 4012 4W6W BRIDGE and Model 2010 NOTCH FILTER. Customer must wire inputs/outputs to wire-wrap edge connectors. 3 postion terminal block wired ?
Type-10 2 pos.

PDF

1090600300 - - HORIZONTAL MOUNTING SHELF 2-POS., (1) MODEL 4445A w/ 117VAC / -24VDC POWER SUPPLY.
NOTES: 117VAC / -24VDC power supply wired to pins-17 (GND) and pins-35 (-24VDC). Each position is pre-wired for a Model 4445A DATA BRIDGE to a twenty (20) position terminal block.
Type-10 2 pos.

PDF

1090600003 - - HORIZONTAL MOUNTING SHELF 2-POS., (2) MODEL 4012, (2) FEMALE CONNECTORS w/ 3 POSITION TERMINAL BLOCK.
NOTES: No power supply. Each position is wired for one (1) Model 4012 BRIDGE. Two (2) Female Telco connectors - one per bridge. 3 postion terminal block wired tp pins 17 (GND) and 35 (-BATT) of each edge connector and frame ground (FG).
Type-10 2 pos.

PDF

1090600400 - - HORIZONTAL MOUNTING SHELF 2-POS., (1) MODEL 6047 JAM7 w/ FIFTEEN (15) POSITION TERMINAL BLOCK, 117VAC / -48VDC POWER SUPPLY.
NOTES: 117VAC / -48VDC power supply wired to pin 17 (GND) and 35 (-48V) of each edge connctor. 15 position terminal block at position-1 wired for Model 6047 JAM7 TCM. Position-2 has wire-wrap edge connector for customer wiring.
Type-10 2 pos.

PDF

1090600500 - - HORIZONTAL MOUNTING SHELF 2-POS., ONE Type-10 POWER SUPPLY w/ MOLEX CONNECTORS, 117VAC/48VDC PIGTAIL.
NOTES: Position-2 is wired with Molex receptacle with 117VAC pigtail for mounting Type-10 Power supply. Pin 17 and pin 35 of Position-1 is wired to pin 17 and pin 35 of position-2, respectively. Position-1 has wire-wrap edge connector for customer wiring.
Type-10 2 pos.

PDF

1090600624 - - HORIZONTAL MOUNTING SHELF 2-POS., WIRE-WRAP w/ 117VAC / -24VDC POWER SUPPLY.
NOTES: 117VAC / -24VDC power supply wired to pins 17 (GND) and 35 (-24V) of each edge connector. Customer wired to two (2) 56-pin wire-wrap edge connectors.
Type-10 -

PDF

1090600648 - - HORIZONTAL MOUNTING SHELF 2-POS., WIRE-WRAP w/ 117VAC / -48VDC POWER SUPPLY.
NOTES: 117VAC / -48VDC power supply wired to pins 17 (GND) and 35 (-48V) of each edge connector. Customer wired to two (2) 56-pin wire-wrap edge connectors.
Type-10 2 pos.

PDF

1090600724 - - HORIZONTAL MOUNTING SHELF 2-POS., TWO (2) MODEL 4012 4W6W BRIDGE, TWO (2) FEMALE TELCO CONNECTORS w/ -24VDC POWER SUPPLY.
NOTES: 117VAC / -24VDC power supply wired to pins 17 (GND) and 35 (-48V) of each edge connector. Each position is wired for one (1) Model 4012 4w6w Bridge. Two (2) Female Telco connectors (one per bridge). Three (3) position terminal block wired for 117VAC input w/ Frame Ground (FG).
Type-10 2 pos.

PDF

1090600748 - - HORIZONTAL MOUNTING SHELF 2-POS., TWO (2) MODEL 4012 4W6W BRIDGE, TWO (2) FEMALE TELCO CONNECTORS w/ -48VDC POWER SUPPLY.
NOTES: 117VAC / -48VDC power supply wired to pins 17 (GND) and 35 (-48V) of each edge connector. Each position is wired for one (1) Model 4012 4w6w Bridge. Two (2) Female Telco connectors (one per bridge). Three (3) position terminal block wired for 117VAC input w/ Frame Ground (FG).
Type-10 2 pos.
CALL 10906100 - - HORIZONTAL MOUNTING SHELF. Type-10 -
CALL 109062 - - HORIZONTAL MOUNTING SHELF, THREE (3) MODULES 100. Type-10 -

PDF

10906300 - - BANTAM JACKFIELD MODULE Type-10 1 pos.
CALL 109091 - - MATRIX MODULE (min MOD CHARGE $75.00) Type-10 -
CALL 109117 - - VOICE OPERATED SWITCH (VOX) MODULE Type-10 1-pos.
CALL 109121 - - TONE SUPPLY Type-10 1 pos.
CALL 109131 - - UNIVERSAL TIMER MODULE Type-10 1 pos.
CALL 109132 - - RINGING TIMER Type-10 1 pos.
CALL 109133 - - LONG INTERVAL TIMER Type-10 1 pos.
CALL 109134 (A&M) - - QUAD DISCONNECTED TIMER Type-10 1 pos.
CALL 109903 - - RINGING INTERRUPER Type-10 1 pos.
CALL 1090600748 - - 4012 119 Type-10 -

APPARATUS CASES AND ASSOCIATED EQUIPMENT

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS

PDF

10191100 1911 APPARATUS CASE, WALL/DESK MOUNTING, WIRE-WRAP SCREW TERM 24 + 3-POSITION TERMINAL BLOCK.
NOTES: No power supply. Customer wired from 56-pin edge connector to 24-pin terminal block. Three (3) additional terminal block pins for customer wiring of power, return and frame ground (FG).
Type-10 1 pos.

PDF

101911030A 1911 APPARATUS CASE, +/- 48VDC / -48VDC MOUNTING CASE.
NOTES: 48VDC / -48VDC MOdel 10191100 with 48VDC isolated DC/DC converter.
Type-10 1 pos.

PDF

10191200 1912 APPARATUS CASE, WALL/DESK MOUNTING, WITH RECTIFIER AND VOLTAGE DOUBLER, WIRE-WRAP AND SCREW TERM. Type-10 1 pos.

PDF

101912A0 1912 APPARATUS CASE, WALL/DESK MOUNTING, WIRE-WRAP SCREW TERM 24 + 3 w/TERMINAL BLOCK.
NOTES: Same as Model 10191100.
Type-10 1 pos.
CALL 101912A1 1912 HOFFMAN CASE, WIRED VEGA 505. Type-10 1 pos.
CALL 1019120100 1912 APPARATUS CASE, WIRE-WRAP, 117VAC / -48VDC.
NOTES: Model 1912A0 (191100) with 117VAC / -48VDC power supply customer wired.
Type-10 1 pos.

PDF

1019120101 1912 APPARATUS CASE, PREWIRED 4001C / SCREW TERM 24 + 3 / 117VAC/-48VDC AMPLIFIER MOUNTING CASE.
NOTES: Backplane specific to Model 104001C LINE AMPLIFIER.
Type-10 1 pos.

PDF

10191201 191201 APPARATUS CASE, 117VAC / 48VDC Type-10 -

PDF

1019120200 1912 APPARATUS CASE, WALL / DESK MOUNTING, WIRE-WRAP 117VAC / -24VDC.
NOTES: Model 1912A0 (191100) with 117VAC / -24VDC power supply customer wired.
Type-10 1 pos.

PDF

10191200xx 1912 (?) WIRED. Type-10 1 pos.

PDF

101912A0 1912A APPARATUS CASE, ONE (1) POSITION, WIRE-WRAP, w/ TERMINAL BLOCK.
NOTES: Same as Model 10191100
Type-10 1 pos.
CALL 101912A1 1912 NYCTA MOUNTING CASE.
NOTES: Backplane specific to EGA Model 1505 Audio Mixer Module. Card guides are mounted on HOFFMAN panel (p/n A16P10) to fit HOFFMAN enclosure (p/n A16106CH).
Type-10 -

PDF

10191300 1913 APPARATUS CASE, WITH RECTIFIER AND VOLTAGE DOUBLER, WALL/DESK MOUNTING, EDGE CONNECTOR/WIRE-WRAP/SCREW/POWER TERMINALS. (SEE 8015 TRANSFORMER.) Type-10 2 pos.

PDF

10191301 19131 APPARATUS CASE, WALL/DESK MOUNTING, NO POWER, EDGE CONNECTOR/WIRE-WRAP/SCREW/POWER TERMINAL. Type-10 2 pos.
CALL 1019130200 - APPARATUS CASE, 117VAC / -48VDC Type-10 -
CALL 10191400 1914 APPARATUS CASE, FOUR MODULE, WALL / DESK MOUNTING. Type-10 -
CALL - 1914P APPARATUS CASE, FOUR MODULE, WITH RECTIFIER AND POWER SUPPLY, WALL OR DESK MTG. Type-10 -
CALL - 1914PR APPARATUS CASE, FOUR MODULE, WITH RECTIFIER AND POWER SUPPLY, WALL OR DESK MTG. Type-10 -
CALL - 1918 APPARATUS CASE, TYPE 14A EQUIVALENT, PLASTIC w/ INTEGRAL SIX (6) POSITION SHELF AND TRANSLUCENT COVER, WALL MOUNTED, INCLUDES TWO (2) 12-PAIR TYPE 66 BLOCKS. Type-10 -
CALL - 1919 APPARATUS CASE, TYPE 15A EQUIVALENT, PLASTIC w/ TWO (2) INTEGRAL SIX (6) POSITION SHELVES AND TRANSLUCENT COVER, WALL MOUNTED, INCLUDES ONE 50-PAIR TYPE 66 BLOCK. Type-10 -
CALL - 1921 APPARATUS CASE, TYPE 15A EQUIVALENT, WALL MOUNTED, INCLUDES ONE (1) 50-PAIR TYPE 66 BLOCK. Type-10 -
CALL 10196300 263-E1 APPARATUS CASE, 117VAC / 48VDC, RJ45 8-PIN MODULAR JACK, NCTE, DST, PINOUT SCREW w/ POWER SUPPLY, WIRED. Type-10 1 pos.
CALL 10196301 263-E2 APPARATUS CASE, (WITHOUT 117VAC / 48VDC), RJ45 8-PIN MODULAR JACK, NCTE, DST, PINOUT SCREW w/ POWER SUPPLY, WIRED. Type-10 1 pos.
CALL 10196400 262-1 NCTE / DST MOUNTING CASE w/ 117VAC / -48VDC POWER SUPPLY, WIRED 262PO-1. Type-10 1 pos.
CALL 10196401 262-1 NCTE / DST MOUNTING CASE D55. Type-10 -
CALL 10196400 262-1 NCTE / DST MOUNTING CASE w/ 117VAC / -48VDC POWER SUPPLY, WIRED 262PO-1. Type-10 1 pos.

AMPLIFIERS AND REPEATERS, ANALOG ECHO CANCELLERS,

DATA STATION TERMINATIONS, DATA AND VOICE

BRIDGING MODULES, PROGRAM TRANSMISSION MODULES,

EQUALIZERS, AND TERMINATING MODULES

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS
CALL 10201000 - - Type-10 -
CALL 104001 4001 4WIRE/4WAY INTERMEDIATE REPEATER w/ RCV SLOPE/BUMP EQUALIZER AND 310-TYPE JACKS. Type-10 -
CALL 104001A0 4001A 4WIRE/4WAY INTERMEDIATE REPEATER w/ RCV AND XMT SLOPE/BUMP EQUALIZER AND 310-TYPE JACKS. Type-10 -

PDF

104001C0 4001C 4WIRE/4WAY INTERMEDIATE REPEATER WITH PRESC. GAIN, PRESC. RCV AND XMT SLOPE EQF., BANTAM JACKS AND SEALING CURRENT ON FACILITY AND STATION SIDES. Type-10 -
CALL - 4001F 4WIRE/4WAY TERM REPEATER WITH PRESC. GAIN, RCV 309B-EQUIVALENT, BANTAM JACKS AND SEALING CURRENT ON FACILITY SIDE. Type-10 -

PDF

104003C0 4003C 4WIRE/4WAY INTERMEDIATE REPEATER WITH PRESC. GAIN, PRESC. RCV AND XMT SLOPE EQF., BANTAM JACKS AND 2-TONE 11-FREQUENCY LOOPBACK. Type-10 1 pos.
CALL - 114006, 4006 COMPRESSION AMPLIFIER w/ 310-TYPE JACKS. Type-10 -
CALL - 4008 PROGRAM AMPLIFIER w/ 5/8Hz AND 15kHz EQUALIZER AND 310-TYPE JACKS Type-10 -

PDF

10401200 4446 ACTIVE BRIDGE MODULE 4WIRE/6WAY CONFERENCED, BALANCED, 1 CKT. (c4201-11) Type-10 1 pos.
CALL - 4018 PROGRAM DISTRIBUTION AMPLIFIER, 8-PORT, w/ NOISE THRESEHOLD CIRCUIT, 600-OHM OUTPUT, 310-TYPE JACKS. Type-10 -

PDF

10402000 4020 ACTIVE DATA BRIDGE MODULE 4WIRE/10WAY ONE (1) COMMON AND NINE (9) MULTIPLE POS, 1 CKT. Type-10 1 pos.
CALL - 4024B 4WIRE/2WAY TERMINATING REPEATER WITH PRESC GAIN, PRESC rcv, SLOPE EQL, BANTAM JACKS, SX/SB SWTICH, ACCEPTS PLUG ON PBN (993- OR 9932 EQUIV.) Type-10 -
CALL - 4024E 4WIRE/2WAY TERMINATING REPEATER WITH PRESC GAIN, PRESC rcv, SLOPE EQL, BANTAM JACKS, SX/SB SWTICH, ACCEPTS PLUG ON PBN (993- OR 9932 EQUIV.) Type-10 -
CALL - 4024R RA SERIES 4WIRE/2WAY TERMINAL REPEATER, REMOTE ASSIGNMENT AT TLP's. Type-10 -
CALL - 4041 AMPLITUDE DISPLAY (CONDITIONING) EQUALIZER WITH 310-TYPE JACKS. Type-10 -
CALL 104201 4201 TERMINATING SET, 2W/4W, 600/900-OHM SWITCHABLE, WITH 310-TYPE JACKS. Type-10 1 pos.
CALL 104203 4203 TERMINATING SET, 2W/4W, 600/900-OHM SWITCHABLE, w/ A&B LEAD INDUCTOR AND 310-TYPE JACKS. Type-10 1 pos.
CALL 104251A 4251A 2WIRE DDB PRESC COMBINER AMPLIFIER w/ BANTAM JACKS AND SEALING CURRENT, ACCEPTS PLUG-ON XMF, PRE-EQL (MAY REQUIRE 9952X FILER SUBASSEMBLY) Type-10 1 pos.
CALL 104252 4252 2WIRE SPLITTER AMPLIFIER w/ RCV SLOPE/BUMP EQL, 310-TYPE JACKS. (MAY REQUIRE 9952X FILER SUBASSEMBLY) Type-10 1 pos.
CALL 104255 4255 2WIRE DDB PRESC QUAD TERMINATION MODULE w/ BANTAM JACKS. Type-10 1 pos.
CALL 104255S 4255S 2WIRE DDB PRESC QUAD TERMINATION MODULE w/ BANTAM JACKS AND SEALING CURRENT. Type-10 1 pos.
CALL 104400 4400 4WIRE BYPASS MODULE Type-10 1 pos.
CALL 104404 4405 4WIRE PAD TRANSFORMER MODULE STATION, w/ 310-TYPE JACKS. Type-10 1 pos.
CALL 104404S 4405S 4WIRE PAD TRANSFORMER MODULE STATION, w/ 310-TYPE JACKS AND SEALING CURRENT. Type-10 1 pos.
CALL 104406 4406 4WIRE KEY STATION TERMINATION w/ SIDETONE AMPLIFIER AND PICK UP RELAY. Type-10 1 pos.
CALL 104408 (A&M) 4408 (A&M) 4WIRE LINE TERMINATION MODULE w/ SIDETONE AMPLIFIER Type-10 1 pos.
CALL 104410 4410 4WIRE PAD TRANSFORMER MODULE, PRESC w/ BANTAM JACKS. Type-10 1 pos.
CALL 104410S 4410S 4WIRE PAD TRANSFORMER MODULE, PRESC w/ SEALING CURRENT AND BANTAM JACKS. Type-10 1 pos.
CALL 104411A 4411A 4WIRE PAD TRANSFORMER MODULE w/ 2-TONE (w/TIMEOUT) OR REVERSE SEALING CURRENT. Type-10 1 pos.
CALL 104416E 4416E 4WIRE-4WAY/2WAY DST, LINE-POWERED, w/ PRESC GAIN, RCV, 3098B EQUIV, BANTAM JACKS, SEALING CURRENT AND LPBK. Type-10 1 pos.
CALL 104419B 4419B 4WIRE-4WAY/2WAY DST, w/ PRESC GAIN, RCV, SLOPE/BUMP EQL, BANTAM JACKS, SEALING CURRENT AND 2-TONE JACK, w/ 4/20 MIN TIMEOUT, ACCEPTS PLUG-ON SMT, PRE-EQL (9908A EQUIV) Type-10 1 pos.
CALL 104420A 4420A RA SERIES 4WIRE-4WAY/2WAY DST, REMOTE ALIGNMENT AT TLP'S OR DLP'S Type-10 1 pos.
CALL 104420B 4420B 4WIRE-4WAY/2WAY DST, w/ PRESC GAIN, RCV, SLOPE/BUMP EQL, BANTAM JACKS, SEALING CURRENT AND 2-TONE JACK, w/ 4/20 MIN TIMEOUT, ACCEPTS PLUG-ON SMT, PRE-EQL (9908A EQUIV) Type-10 1 pos.
CALL 104420U 4420U RA SERIES 4WIRE-4WAY/2WAY DST, REMOTE ALILGNMENT AT TLP'S OR DLP'S w/ XMT EQUALIZER Type-10 1 pos.
CALL 104422 4422 REPEAT COIL, DUAL Type-10 1 pos.
CALL 104423 (A&M) 4423 (A&M) REPEAT COIL, DUAL, PROTECTED Type-10 1 pos.
CALL 104425 4425 WIDEBAND REPEAT COIL, DUAL Type-10 1 pos.

PDF

104445A0 4445 4WIRE/5WAY ACTIVE DATA BRIDGE w/ EXPANSION BUS OUTPUT, INDIVIDUAL MULT-PORT LEVEL CONTROLS AND BANTAM JACKS. Type-10 1 pos.
CALL 104446 4446 4WIRE/6WAY ACTIVE BRIDGE FOR VOICE CONFERENCING Type-10 1 pos.
CALL 104449 4449 4WIRE/9WAY ACTIVE DATA BRIDGE, ONE COMMON AND EIGHT MULTIPLE PORTS, w/ 310-TYPE JACKS (SEE 4020). Type-10 1 pos.
CALL 104451 4451 4WIRE DDB MODULE (COMBINER AND SPLITTER AMPLIFIER) w/ RCV, SLOPE/BUMP EQL, XMT SLOPE PRE-EQL. w/ 310-TYPE JACKS, AND SEALING CURRENT. Type-10 1 pos.
CALL 104451A 4451A 4WIRE DDB MODULE (COMBINER AND SPLITTER AMPLIFIER) w/ RCV, SLOPE/BUMP EQL, XMT SLOPE PRE-EQL. w/ 310-TYPE JACKS, AND SEALING CURRENT, AND TEST ACCESS TRANSFER RELAY ON BRIDGE SIDE. Type-10 1 pos.
CALL 104452A 4452A 4WIRE DDB MODULE (COMBINER AND SPLITTER AMPLIFIER) PRESC w/ RCV AND XMT SLOPE EQL. w/ BANTAM JACKS, AND SEALING CURRENT, AND TEST ACCESS TRANSFER RELAY ON BRIDGE SIDE. Type-10 1 pos.
CALL 104452B 4452B 4WIRE DDB MODULE (COMBINER AND SPLITTER AMPLIFIER) PRESC w/ RCV, 309-B EQUIV EQL w/ BANTAM JACKS, AND SEALING CURRENT, AND TEST ACCESS TRANSFER RELAY ON BRIDGE SIDE, ACCEPTS PLUG-ON XMT PRE-EQL. Type-10 1 pos.
CALL 104453 4453 4WIRE DDB TERMINATION MODULE, PASSIVE w/ 23dB OR 0.5dB FIXED LOSS AND BANTAM JACKS FOR CARRIER INTERFACE. Type-10 1 pos.
CALL 104454A 4454A 4WIRE DDB TERMINATION MODULE, PASSIVE PRESC LOSS, BANTAM JACKS, SEALING CURRENT, AND TEST ACCESS TRANSFER RELAY ON BRIDGE SIDE. Type-10 1 pos.
CALL 104454B 4454B 4WIRE DDB TERMINATION MODULE, PASSIVE PRESC LOSS, BANTAM JACKS, SEALING CURRENT, AND TEST ACCESS TRANSFER RELAY ON FACILITY SIDE. Type-10 1 pos.
CALL 104455 (A&M) 4455 (A&M) 4WIRE DDB TERMINATION MODULE, PASSIVE PRESC LOSS, w/ RCV SLOPE/BUMB RQL, BANTAM JACKS AND SEALING CURRENT (REPLACEMENT 4455A) Type-10 1 pos.
CALL 104455A 4455A 4WIRE DDB TERMINATION MODULE, PASSIVE PRESC LOSS, w/ RCV SLOPE/BUMB RQL, BANTAM JACKS AND SEALING CURRENT, w/ TEST ACCESS TRANSFER ON BRIDGE SIDE. Type-10 1 pos.
CALL 104456A 4456A 4WIRE DDB TERMINATION MODULE, ACTIVE PRESC, w/ RCV 309B-EQUIV, POST EQL, BANTAM JACKS AND SEALING CURRENT, w/ TEST ACCESS TRANSFER ON FACILITY SIDE, ACCEPTS PLU-ON XMT PRE-EQL. Type-10 1 pos.
CALL 104456B 4456B 4WIRE DDB TERMINATION MODULE, ACTIVE PRESC, w/ RCV 309B-EQUIV, POST EQL, BANTAM JACKS AND SEALING CURRENT, w/ TEST ACCESS TRANSFER ON FACILITY SIDE, ACCEPTS PLU-ON XMT PRE-EQL. (REPLACEMENT 4456D) Type-10 1 pos.
CALL 104456C 4456C 4WIRE DDB TERMINATION MODULE, ACTIVE PRESC, w/ RCV SLOPE POST-EQL, BANTAM JACKS AND SEALING CURRENT, w/ TEST ACCESS TRANSFER ON BRIDGE SIDE, ACCEPTS PLU-ON XMT PRE-EQL. Type-10 1 pos.
CALL 104456D 4456D 4WIRE DDB TERMINATION MODULE, ACTIVE PRESC, w/ RCV 309B-EQUIV, POST-EQL, BANTAM JACKS AND SEALING CURRENT, w/ TEST ACCESS TRANSFER ON BRIDGE SIDE, ACCEPTS PLU-ON XMT PRE-EQL. Type-10 1 pos.
CALL 104458 4458 DDB DTMF CONTROL MODULE (FOR REMOTE 244 TERMINATE-AND-LEAVE BRIDGE DIAGNOSTICS) Type-10 1 pos.
CALL 104460 4460 DDB TERMINATE-AND-LEAVE TEST ACCESS BUS MODULE Type-10 1 pos.

PDF

104462B 4462B 4WIRE/2WAY VOICE CONFERENCE BRIDGE w/ INTEGRAL LINE AMP, RCV SLOPE/BUMP EQL, BANTAM JACKS AND SEALING CURRENT. Type-10 1 pos.

SIGNALING AND TRUNK MODULES, SUBASSEMBLIES,

AND ANALOG ECHO CANCELLERS

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS
PDF 106048A 6048A 4WIRE/4WAY SF-to-E&M TERMINATING REPEATER WITH PRESC GAIN, PRESC RCV, SLOPE/BUMP EQUALIZER., XMT SLOPE PRE-EQUALIZER, AND BANTAM JACKS w/ LPBK413R. Type-10 1 pos.
CALL 106003 6003 2WIRE AUTOMATIC RINGDOWN MODULE w/ TRANSFER RELAY. Type-10 1 pos.
CALL 106006 6006 SIGNALING CONVERTER, E&M-TO-RINGING (D18), SF-TO-E&M (D08), OR SG-LEAD-TO-RINGING (10D) Type-10 1 pos.
CALL 106007 6007 LOOP-START-TO-DUAL GROUND-START CONVERTER MODULE. Type-10 1 pos.
CALL 106008A 6008A FXS-TO-E&M SIGNALING CONVERTER SUBASSEMBLY w/ LS/GS, REV, BATT, AND ARD (USED ON 613X TERMINAL INTERFACE MODULES. Type-10 1 pos.
CALL 106008B 6008B FXS-TO-E&M SIGNALING CONVERTER SUBASSEMBLY w/ LS/GS, REV, BATT, (USED ON 613X TERMINAL INTERFACE MODULES. Type-10 1 pos.
CALL 106008C 6008C DX-TO-E&M SIGNALING CONVERTER SUBASSEMBLY (USED ON 613X TERMINAL INTERFACE MODULES. Type-10 1 pos.
CALL 106008D 6008D E&M-TO-E&M SIGNALING CONVERTER SUBASSEMBLY w/ LS/GS, REV, BATT (USED ON 613X TERMINAL INTERFACE MODULES. Type-10 1 pos.
CALL 106043A 6043A 4WIRE-4WAY/2WAY DX-TO-E&M TERMINATING REPEATER w/ PRESC GAIN, PRESC RCV, SLOPE/BUMP EQL, XMT SLOPE/BUMP PRE-EQL, BANTAM JACKS, AND 2-TONE TRANSMIT AND SIGNALING LOOPBACK w/ TIMEOUT. Type-10 1 pos.
CALL 106043R (A&M) 6043R (A&M) RA SERIES 4WIRE-4WAY/2WAY DX-TO-E&M TERMINATING REPEATER, REMOTE ALIGNMENT AT TLP'S Type-10 1 pos.
CALL 106044 6044 4WIRE-4WAY DX-TO-E&M TERMINATING REPEATER w/ RCV SLOPE EQL AND 310-TYPE JACKS. Type-10 1 pos.
CALL 106048A 6048A 4WIRE-4WAY SF-TO-E&M TERMINATING REPEATER w/ PRESC GAIN, PRESC RCV, SLOPE/BUMP EQL, XMT SLOPE PRE-EQL, AND BANTAM JACKS WITH LOOPBACK 413R. Type-10 1 pos.
CALL 106048R 6048R RA SERIES 4WIRE-4WAY/2WAY SF-TO-E&M TERMINATING REPEATER, REMOTE ALIGNMENT AT TLP'S Type-10 1 pos.
CALL 106073 6073 DTMF / DUAL DECODER (1,2 or 3 DIGIT) w/ 12 LATCHED OR MOMENTARY OUTPUTS. Type-10 1 pos.
CALL 1060013 60013 LOOP-TO-E&M SIGNALING CONVERTER FXS, LS/LG AND REV BATT. Type-10 1 pos.
CALL 106114 6114 LOOP-TO-E&M SIGNALING CONVERTER FXO, LS/LG AND REV BATT. Type-10 1 pos.
CALL 106123A 6123A 4WIRE/2WAY SF-TO-FXS/ARD TERMINATING REPEATER w/ PRESC GAIN, PRESC RCV SLOPE/BUMP EQL, PRESC XMT SLOPE PRE-EQL, BANTAM JACKS AND 2-TONE AND SIGNAL LOOPBACK, w/ TIMEOUT. Type-10 1 pos.
CALL 106124A 6124A 4WIRE/2WAY SF-TO-FXO INTERMEDIATE REPEATER w/ PRESC GAIN, PRESC RCV SLOPE/BUMP EQL, XMT SLOPE PRE-EQL, BANTAM JACKS AND 2-TONE TRANSMIT AND SIGNAL LOOPBACK, w/ TIMEOUT, -48V OPERATION. Type-10 1 pos.
CALL 106125R 6125R RA SERIES 4WIRE/2WAY SF-TO-FXS/FXO/ARD TERMINATING REPEATER, REMOTE ALIGNMENT AT TLP'S. Type-10 1 pos.
CALL 10613100 826131 2WIRE/4WIRE-4WAY TERMINAL MODULE (REPEATER) w/ BANTAM JACKS, NO EQL, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES. Type-10 1 pos.
CALL 106131A0 81-8261310 2WIRE/4WIRE-4WAY FXS-TO-E&M TERMINAL INTERFACE MODULE (REPEATER) w/ BANTAM JACKS, NO EQL, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INLCUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106131B0 81-826131B 2WIRE/4WIRE-4WAY FXO-TO-E&M TERMINAL INTERFACE MODULE (REPEATER) w/ BANTAM JACKS, NO EQL, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INLCUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106131C 6131C 2WIRE/4WIRE-4WAY DX-TO-E&M TERMINAL INTERFACE MODULE (REPEATER) w/ BANTAM JACKS, NO EQL, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INLCUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106131D 6131D 2WIRE/4WIRE-4WAY TERMINAL INTERFACE MODULE (REPEATER) w/ BANTAM JACKS, NO EQL, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INLCUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106132 6132 2WIRE/4WIRE-4WAY TERMINAL INTERFACE MODULE (REPEATER) w/ BANTAM JACKS, NO EQL, NCTE PIN-OUTS FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INLCUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106132A 6132A 2WIRE/4WIRE-4WAY FXS-TO-E&M TERMINAL INTERFACE MODULE (REPEATER), w/ BANTAM JACKS, nO EQL AND NTCE PINOUTS, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INCLUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106132B 6132B 2WIRE/4WIRE-4WAY FXO-TO-E&M TERMINAL INTERFACE MODULE (REPEATER), w/ BANTAM JACKS, nO EQL AND NTCE PINOUTS, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INCLUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106132C 6132C 2WIRE/4WIRE-4WAY DX-TO-E&M TERMINAL INTERFACE MODULE (REPEATER), w/ BANTAM JACKS, nO EQL AND NTCE PINOUTS, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INCLUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106132D 6132D 2WIRE/4WIRE-4WAY E&M-TO-E&M TERMINAL INTERFACE MODULE (REPEATER), w/ BANTAM JACKS, nO EQL AND NTCE PINOUTS, FOR CARRIER, RADIO OR MULTIPLEXER-TYPE INTERFACES (INCLUDES 6008A SIGNALING CONVERTER SUBASSEMBLY) Type-10 1 pos.
CALL 106168 6168 4WIRE-4WAY/2WAY DX-TO-E&M TERMINAL REPEATER, w/ PRESC GAIN, RCV, 309B EQUIV, EQL AND BANTAM JACKS, NO LOOPBACK. Type-10 1 pos.
CALL 106168D 6168D 4WIRE-4WAY/2WAY DX-TO-E&M TERMINAL REPEATER, w/ PRESC GAIN, RCV AND XMT, 309B EQUIV, EQL AND BANTAM JACKS, NO LOOPBACK. Type-10 1 pos.
CALL 106919H 6919H ANALOG LONG END PATH ECHO CANCELLER w/ PADS (TYPE 16) (REPLACEMENT 4119) Type-10 1 pos.

LOOP TREATMENT EQUIPMENT

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS
CALL 107001 7001 DUAL LONG LINE, LOOP START ONLY Type-10 1 ckt.
CALL 107001A 7001A DUAL LONG LINE, LOOP START ONLY, w/ NCTE PINTOUTS Type-10 1 ckt.
CALL 107002 7002 DUAL LONG LINE, LOOP START OR GROUND START Type-10 1 ckt.
CALL 107002A 7002A DUAL LONG LINE, LOOP START OR GROUND START, w/ NCTE PINOUTS Type-10 1 ckt.
CALL 107201 7201 2WIRE-2WAY SWITCHED GAIN REPEATER Type-10 1 ckt.
CALL 107206 7206 2WIRE-2WAY SWITCHED GAIN COMRESSION AMPLIFIER Type-10 1 ckt.

POWER AND RINGING EQUIPMENT

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS
CALL 108001 8001 POWER SUPPLY, 117VAC, 60Hz INPUT, 24/48VDC 1A OUTPUT, 8 FT INPUT CORD, KTU MOUNT KTU -
CALL 108002 8002 POWER SUPPLY, 117VAC 60Hz INPUT, 48VDC 2A OUTPUT, WALL MOUNTED Type-10 -
CALL 108003 8003 POWER SUPPLY, 117VAC 60Hz INPUT, 48VDC 2A OUTPUT, 19/23 INCH RACK MOUNTING RELAY RACK -
CALL 108005 8005 POWER SUPPLY, 230VAC 50/60Hz INPUT, SWITCHABLE 24/48VDC 1A OUTPUT, KTU MOUNTING KTU -
CALL 108007 8007 POWER SUPPLY, 117/230VAC 60Hz INPUT, 48VDC 10A OUTPUT, 19/23 INCH RACK MOUNTING RELAY RACK -
CALL 108011 8011 POWER SUPPLY, 117VAC 60Hz INPUT, 24VDC 0.5A OUTPUT, WALL SOCKET PLUG-IN SKT -
CALL 108012 8012 POWER SUPPLY, 117VAC 60Hz INPUT, 48VDC 0.25A OUTPUT, WALL SOCKET PLUG-IN SKT -
CALL 108013 8013 POWER SUPPLY, 117VAC 60Hz INPUT, 24VDC 0.2A AND 10VAC 0.1A OUTPUTS, WALL SOCKET PLUG-IN SKT -
CALL 108015 8015 TRANSFORMER, 117VAC, 26VDC 7.5A OUTPUT, WALL SOCKET PLUG-IN 500mA SKT -
CALL 108016 8016 POWER SUPPLY, 117VAC 60Hz INPUT, 48VDC 0.55A UNFILTERED OUTPUT, WALL SOCKET PLUG-IN (FOR USE ONLY WITH 1914P AND 1914PR ASEEMBLIES) SKT -
CALL 108018 8018 TRANSFORMER, 117VAC 60Hz INPUT, 26VAC 10A OUTPUT, w/ 6FT POWER CORD, WALL SOCKET PLUG-IN SKT -
PDF 10802000 8020 POWER SUPPLY, SINGLE, 117VAC 50-60Hz INPUT, 48VDC 1.25A OUTPUT.
NOTES: Power supply, 117VAC / 48VDC 1.25A, Type-10. do not use, see Model 1080204800.
Type-10 1 ckt.
CALL 10802024 - POWER SUPPLY, SINGLE, 117VAC / 24VDC 2.50A
NOTES: do not use, see Model 1080202400.
Type-10 -
PDF 1080202400 - POWER SUPPLY, SINGLE, 117VAC 2.5A PT / -24VDC 2.5A Type-10 1-2 ckts, 1 pos.
PDF 1080202401 - POWER SUPPLY, SINGLE, 117VAC 2.5A PT / +24VDC 2.5A Type-10 1 ckt.
PDF 1080204800 - POWER SUPPLY, SINGLE, 117VAC 1.25A PT / -48VDC
NOTES: (6130-01-362-1233-1).
Type-10 1 ckt.
PDF 1080204801 - POWER SUPPLY, SINGLE, 117VAC 1.25A PT / +48VDC Type-10 1-2 ckts, 1 pos.
CALL 1080204802 - POWER SUPPLY, 117VAC / -48VDC, 1.25A, w/ MOLEX PIGTAIL Type-10 -
CALL 1080204803 - POWER SUPPLY, 117VAC / -48VDC, 1.25A, w/ PIN-1 CONNECTED TO "OR"ING DIODE CATHODE Type-10 -
PDF 10802100 8021 POWER SUPPLY, SINGLE, 117VAC 50/60Hz INPUT, 48VDC 2.0A OUTPUT
NOTES: do not use - see Model 1080214800.
Type-10 1 ckt.
CALL 10802124 - POWER SUPPLY, SINGLE, 117VAC / -24VDC, 4.5A.
NOTES: do not use - see Model 1080212400.
Type-10 -
PDF 1080212400 - POWER SUPPLY, DUAL, 117VAC / -24VDC, 4.5A. Type-10 1-2 ckts, 1 pos.
CALL 1080212402 - POWER SUPPLY, 117VAC / -24VDC, 4.5A, DUAL DIODE OR'd
NOTES: This is the same as Model 1080212400.
Type-10 -
PDF 1080214800 - POWER SUPPLY, DUAL, 117VAC / -48VDC, 2A Type-10 1-2 ckts, 1 pos.
CALL 1080214801 - POWER SUPPLY, 117VAC / +48VDC, 2A Type-10 -
CALL 1080214802 - POWER SUPPLY, 117VAC / -48VDC, 2A DUAL OR'd
NOTES: This is the same as Model 1080214800.
Type-10 -
CALL 1080214803 - POWER SUPPLY, DUAL, 117VAC / -48VDC, 2A, w/ MOLEX PIGTAIL, ABC (DIODE) Type-10 1-2 ckts, 1 pos.
CALL 108034 8034 DC TO DC CONVERTER, -24/-48VDC INPUT, +5, +12 AND -12VDC OUTPUT Type-10 -
CALL 108035 8035 POWER SUPPLY, 117VAC 50/60 Hz, SWITCHABLE, 24VDC, 4.0A OR 48VDC, 2.0A OUTPUT. Type-10 2 pos.
CALL 108050 - POWER AND RINGING SUPPLY, 117VAC 60Hz INPUT, 24VDC 2.5A OR 48VDC 1.25A OUTPUT, 96VAC 20/30Hz 12W RINGING OUTPUT, 10VAC 700mA UNREGULATED LAMP OUTPUT, KTU HARDWARE INLCUDED. Type-10 -
CALL 108070 - DETECTOR MODULE, PROPANE/HYDROGEN, 48VDC 19 x 1.75 PANEL RELAY RACK -
CALL 10807801 - DETECTOR MODULE, PROPANE/HYDROGEN, 24VDC 19 x 1.75 PANEL RELAY RACK -
CALL 10809100 - POWER SUPPLY, 48VDC / 24VDC 2A Type-10 -
CALL 10809110 - POWER SUPPLY, +24VDC / -24VDC 2A Type-10 1 ckt.
CALL 10809112 - POWER SUPPLY, +24VDC / -24VDC DUAL CKT DIODE ORD. Type-10 1 ckt.
CALL 108101 - RINGING GENERATOR, 117VAC 60Hz INPUT, 80-110VAC, 15W OUTPUT, 16.7Hz 20Hz 25Hz 50Hz KTU MOUNT. KTU MOUNT -
PDF 10810201 - RINGING GENERATOR, 48VDC INPUT, 85-135VAC, 20Hz, 15W OUTPUT. - -
PDF 10810202 - INTERRUPTED RINGING, KTU MOUNT. KTU -
CALL - - RINGING GENERATOR, 48VDC INPUT, 95VAC, 20/30Hz 10W OUTPUT, w/ RINGING INTERRUPTOR, KTU HARDWARE INCLUDED. Type-10 OR KTU -
PDF 10810301 - RINGING GENERATOR, 48VDC / 95VAC, 15W, 20Hz, w/ RINGING INTERRUPTOR Type-10 1 ckt.
PDF 10810302 - RINGING GENERATOR, 48VDC / 86VAC, 10W, 16.7Hz 20Hz 25Hz 50Hz, w/ RINGING INTERRUPTOR Type-10 -
CALL 10810303 - RINGING GENERATOR, 48VDC / 95VAC, 20Hz, w/ RINGING INTERRUPTOR KTU MOUNT -
CALL 10810304 - RINGING GENERATOR, 48VDC / 95VAC, xxHz, w/ RINGING INTERRUPTOR KTU MOUNT -
CALL 10810305 - RINGING GENERATOR, 24VDC / 95VAC, 20Hz, w/ RINGING INTERRUPTOR Type-10 -
CALL 10810306 - RINGING GENERATOR, 24VDC / 95VAC, 30Hz, w/ RINGING INTERRUPTOR Type-10 -
CALL 10810307 - RINGING GENERATOR, 24VDC / 95VAC, 20Hz, w/ RINGING INTERRUPTOR KTU MOUNT -
CALL 10810308 - RINGING GENERATOR, 24VDC / 95VAC, xxHz, w/ RINGING INTERRUPTOR KTU MOUNT -
CALL 108108 - RINGING GENERATOR, 48VDC INPUT, 90VAC 20Hz 20W OUTPUT KTU MOUNT -
CALL 108111 - RINGING GENERATOR, 117VAC 60Hz INPUT, 100VAC xxHz 2W OUTPUT, WALL SOCKET PLUG-IN. SKT -
CALL 108205 - DUAL 24/48/72VDC BATTERY FILTER AND FUSE DISTRIBUTION PANEL,w/ ALARM, 19/23INCH RELAY RALY MTG. RELAY RACK -
CALL 108210 - FUSE PANEL, 19/23INCH RELAY RACK MTG, FOR USE w/ Type-10 EQUIPMENT (FUSED FOR 25 CIRCUITS). RELAY RACK -

DETECTION, CONTROL, TIMING AND MISC. MODULES

LIT AEI MODEL TELLABS DESCRIPTION MOUNTING CIRCUITS
PDF 109001 9001 RELAY MODULE, 24VDC, FOUR RELAYS WITH 4-POLE, FORM C CONTACTS Type-10 4 ckts, 1-pos.
PDF 109002 9002 RELAY MODULE, 48VDC, FOUR RELAYS WITH 4-POLE, FORM C CONTACTS Type-10 4 ckts, 1-pos.
CALL 109003A 9003A RINGING INTERRUPTER CONTROL MODULE w/ ZERO-CROSSING NETWORK - -
CALL 109005 9005 FIVE (5) CIRCUIT LOOP CURRENT DETECTOR w/ BATTERY FEED POLARITY OPTION Type-10 -
CALL 109006 9006 MULTIPLE SIX (6) CIRCUIT TRANSFER MODULE, USED FOR PBX BYPASS Type-10 -
CALL 109011 9011 PULSE TRUNK LINK REPEATER AND DUAL PULSE CORRECTOR GS-TO-LS CONVERTER INLCUDED. Type-10 -
PDF 10902100 9021 FUSE MODULE w/ THIRTEEN (13) 0.24A BUSSMAN GMT-TYPE FUSES (6120-01-476-2755-1) Type-10 -
CALL 10902xxx - FUSE MODULE 0.5A Type-10 -
CALL 109026 (A&M) - JACKFIELD MODULE, EIGHT (8) 310 TYPE JACKS. Type-10 -
CALL 109091 - - Type-10 -
CALL 10900700 - RELAY MODULE, 4-POLE, FORM C, SW, LED Type-10 4 ckts, 1-pos.
CALL 10980300 - EXTENDER FOR Type-10 MODULES Type-10 1 pos.

HOME